Ethernet Module

Products » Industrial Embedded System and Device » Low Power Controller Series » Ethernet Module » EM1206 BASIC-programmable Ethernet Module

EM1206 BASIC-programmable Ethernet Module

EM1206 BASIC-programmable Ethernet Module

The EM1206 is a miniature BASIC-programmable embedded module. In combination with the RJ203 jack/magnetics, the EM1206 occupies only 34.5×19 mm of board space. Alternatively, the EM1206 can be used with any suitable magnetics and jack.

The module’s hardware mix, which includes 100Base/T Ethernet, four serial ports, flash disk, EEPROM, and RTC, has been carefully tailored to address the typical needs of network-enabled control applications.

This makes the EM1206 especially suitable for “connected” edge products such as sensors, network-enabled card readers, actuators, and other lightweight devices.

The EM1206 can also support Wi-Fi communications (this requires GA1000 add-on board), as well as external LCD, keypad, and buzzer.

The EM1206 can be ordered standalone or in combination with the RJ203 module.

Specifications
  • Based on a high-performance purpose-built 88-MHz ASIC (T1000).
  • 10/100BaseT auto-MDIX Ethernet port (no magnetics).
  • Optional Wi-Fi interface (requires GA1000 add-on module).
  • Four high-speed serial ports (CMOS-level):

                        Baudrates of up to 921,600bps;

                        None/even/odd/mark/space parity modes;

                        7/8 bits/character modes;

                        Full-duplex mode with optional flow control;

                       Half-duplex mode with direction control;

                       Encoding and decoding of Wiegand and clock/data streams.

  • Up to 1024KB flash memory for firmware, application, and data.
  • 2KB EEPROM for data storage.
  • RTC with backup power input.
  • Supports external keypad.
  • Programmable square-wave output for external buzzer.
  • Up to 17 general-purpose I/O lines (including 8 interrupt lines).
  • Control lines for two external status LEDs.
  • Four status LEDs onboard:

                       Green and red status LEDs;

                       Green and yellow Ethernet status LEDs.

  • Software-controlled onboard PLL.
  • Reliable power-on/brown-out reset circuit.
  • Power: 230mA @ 3.3V (100BaseT mode, PLL on).
  • Dimensions: 33.2x18.1x5.5mm.
  • Firmware is upgradeable through the serial port or network.

 

Loading Updating cart...
LoadingUpdating...

At Edex Technology, our company supplies the most comprehensive technology of computer engineering products and services. Our core products include sophisticated computer products such as the industrial network switch, industrial embedded appliances and industrial communication.

Each product serves with its different purposes in helping users to maximize the usage of their computer systems. With the developed systems and software from Edex Technology, customers’ requirements can be met with our support from computerized integrated customer management system.